Absence Of Water Detector - External 12VDC/30 Second Sample Rate/C Form Relay OutputNPNB-2808-12V
Absence Of Water Detector - External 12VDC/30 Second Sample Rate/C Form Relay Output
This Absence of Water Sensor is a totally new innovative design that helps monitor the level of water and other non flammable liquids. It is submersible, fully self-contained and responds reliably to the absence of or the presence of water. It fits a multitude of applications in a wide range of environmental landscapes. The C-form relay gives the installer greater flexibility for triggering wireless and hardwired communication devices.
This Absence of Water Detector is targeted for monitoring a fluid level height. This submersible sensor can safely and reliably sense and respond to the absence of or presence of a non-volatile liquid in a wide range of environmental conditions.
This Series of Water Detectors are microprocessor controlled devices that produce an AC Signal between two stainless steel probes. Depending on the conductivity measured between the two probes, a set of internal relay contacts will be latched in an open or closed position.
Sensor life span is optimized by periodically sampling for liquid at set timed intervals. A sampling rate of once every 30 seconds is used with the Externally Powered Water Detector providing a 15+ year life expectancy. External connections are made through the included 12 inches of Direct Burial cable allowing for up to a foot of total submersion, burial or harsh environmental exposure.
- Microprocessor Controlled
- Senses The Lack Of Or Presence Of Any Non-Volatile Liquid
- Submersible and Fully Self Contained
- Standard Sample Rate is Once Every 30 Seconds
- Form C Relay
- 12” Cable
- Made In U.S.A.
|Operating Voltage (Volts DC)||12|
|Operating Current (mA)||7 nominal|
|Operating Temperature (™ C)||70 to -40|
|Nominal Switching Capacity (A @ Volts DC)||2 @ 30|
|Maximum Switching Power (W)||60|
|Maximum Switching Voltage (VDC)||220|
|Maximum Switching Current (A)||2|
- 1 x Water Detector